Heat detection paint Daisy Paint

The efficient and cost-effective solution for monitoring the behaviour of cows in heat for better insemination success. The water-based marking paint is extremely visible and available in different colours to mark and distinguish the cows according to their cycle.

  • water-based marking paint for efficient and cost-effective heat detection of cows
  • increases insemination success, reduces the number of non-bearing animals and lowers reproduction costs
  • the colour applied to the base of the tail is rubbed off by mutual mounting and makes animals in heat easily recognisable
  • using a colour scheme, the animals can be identified differently depending on the cycle
  • contains bitter substance
  • significantly better visibility than with conventional marking pens and sprays
  • available in four bright colours: red, blue, green and orange
  • easy application of the colour using the optionally available tailpainter applicator

Recommendations for use:

Six weeks before you start inseminating, mark the whole herd with the 1st colour (red).

Worn-off dye indicates that the animal is in heat. Animals in heat are marked until the start of insemination with the second colour (blue).

Inseminations can begin after six weeks. Animals still marked in red that do not have a cycle should be examined by a vet and treated if necessary.

All inseminated animals are marked with the third colour (green).

Animals that are inseminated repeatedly are marked with the 4th colour (orange).

Ref. no.ColourContentsPU
20704red750 ml / Bottle1/12
20705blue750 ml / Bottle1/12
20706green750 ml / Bottle1/12
20707orange750 ml / Bottle1/12
20708red2,5 L / Canister1
20709blue2,5 L / Canister1
20710green2,5 L / Canister1
20711orange2,5 L / Canister1
20712red5 L / Canister1
20713blue5 L / Canister1
20714green5 L / Canister1
20715orange5 L / Canister1