Aesculap Clipping Heads - Favorita system

Very long edge-retention thanks to high-quality carbon steel

• high production quality thanks to Aesculap CNC machining centres, all parts are machined or profile-ground

• consistent edge-retention thanks to adjustable plate pressure

• high-end surface treatment ensures high level of corrosion protection

Please only have your clipping heads and clippers sharpened or repaired at the service centres listed in the manual or by an authorised dealer.
ref. no.
clipping length
cutting width
MQ
GH700 0.05 mm 40 mm 1 10 1/10/100
GH703 0.1 mm 40 mm 1 10 1/10/100
GT730 0.5 mm 40 mm 1 10 1/10/100
GT772 0.7 mm 20 mm 1 10 1/10/100
GH712 1 mm 40 mm 1 10 1/10/100
GT736 1 mm 40 mm 1 10 1/10/100
GT746 1.5 mm 40 mm 1 10 1/10/100
GT710 1.8 mm 40 mm 1 10 1/10/100
GH715 2 mm 40 mm 1 10 1/10/100
GT742 2 mm 40 mm 1 10 1/10/100
GT749 2.8 mm 60 mm 1 10 1/10/100
GT748 3 mm 40 mm 1 10 1/10/100
GT754 3 mm 40 mm 1 10 1/10/100
GT758 5 mm 40 mm 1 10 1/10/100
GT770 7 mm 40 mm 1 10 1/10/100
GT779 9 mm 40 mm 1 10 1/10/100
GT782 12 mm 40 mm 1 10 1/10/100
GT784 16 mm 40 mm 1 10 1/10/100