Frost Protection Heating Cable for Gutters and Pipes

The plug-in heating cable, developed for gutters and pipes, meets the requirements of strength class M2 as per IEC60500:2009, to keep gutters and pipes safely above freezing.

The high heating power of 20 watts per metre means the heating cable keeps gutters, downspouts and piping frost-free even at very low temperatures. The integrated temperature switch reliably switches the heating cable on at a temperature of +3 °C and off again at +12 °C.

• suitable for gutters: Strength class M2

• ready-to-plug heating cable for easy installation

• integrated thermostat for energy-saving use

• high protection class: IPX7

• suitable for metal water pipes

• incl. safety plug for high level of safety

• connector cable length: 2 m

• IPX7

• protection class: I

Note:

• Please note that each heating cable connection must be fused via a separate residual current circuit breaker. (e.g. item no. 296099, plug-in PRCD switch)

• The heating cable must be protected against sharp edges, e.g. where the guttering meets the downpipe, using edge protection (item no. 296098).

• The heating cable must not overlap, cross over or be in contact with itself or another heating cable at any point. To permanently prevent contact, we recommend the use of suitable spacers if necessary (item no. 296097).

• For safety reasons, pipes and metal guttering, protective tubes and sheathing must be earthed before installation.


available from: March 2020


ref. no.
description
length
Ø
296087
100 W
5 m 6 mm 1/10 100
296088
200 W
10 m 6 mm 1/10 100
296089
300 W
15 m 6 mm 1/10 100
296090
400 W
20 m 6 mm 1/10 100
296091
500 W
25 m 6 mm 1/10 80
296092
800 W
40 m 6 mm 1/10 80
296093
1000 W
50 m 6 mm 1/10 80
Additional accessories
ref. no.
description
MQ
296097
Spacer for Heating Cable incl. Cable Tie
1 1/250
296098
Kink Protection for Heating Cable incl. Cable Tie
1 1/100
296099
Personal Safety Switch
1 1